With the rapid development of industrial equipment, the lubrication device of the equipment is also updated. The application of an imported micro spray lubrication device in dipping machine equipment is introduced below. The structure of the micro spray lubrication controller is centered on the micro spray oil supplier, which is used for spray lubrication of bearings, gears, chains, etc. It is a centralized lubrication device that installs all the necessary machine elements in the steel plate chassis.
In order to prevent any touch or manipulation of the inner parts of the box, the outer jacket of the box body is designed as a lock type. The tank fuel supplier is equipped with a standard heater for heating, so that the stored oil is not affected by the ambient temperature, but can often spray a certain amount of oil mist.
Auxiliary relay. Connected with the oil level switch of the oil supplier, it can expand the current needed for operation and control the opening and closing of the oil heater while protecting the contact point of the oil level switch.
The contacts of relays are connected with terminal rows.
While the oil heater is operated, the indicator lights and the linkage box can also be turned on when an accident occurs, which plays a chain role on the parts in the box. Although the tiny oil particles formed in the spray feeder are filled with the conveyor pipe, they can reach the long-distance oil supply point without precipitation on the way because of the low-pressure air flow.
(e.g.
bearings, chains, gears, etc.). This kind of oil particle is called the reclassifier forehead at the oil supply point.
It changes from dry oil mist to particle size suitable for lubrication (wet mist). It is sprayed on the friction surface, so that the friction surface is often covered with a fresh lubricant film. This spray lubrication method is suitable for centralized lubrication of bearings, gears, chains, sliding surfaces and cams of all machinery and equipment. Lower Limit Oil Level Switch Lower Limit Oil Level Switch is installed by using the oil supply port of the main body of the oil supplier. When the oil storage in the tank decreases and needs to be replenished, the auxiliary relay can be driven to start working, the accident indicator light can be lit, and the circuit of the oil heater can be closed.
At the same time, the alarm equipment such as buzzer can also work. The indicator lights turn red and green, and the oil heater is connected. In the oil tank of the spray feeder, an oil heater can be installed through the upper flange to prevent oil decomposition, quality deterioration and carbonization of the heating part.
The oil level switch starts to work when the oil storage in the oil supply tank is reduced and needs to be replenished. First, the accident indicator lights up (red), and the oil heater stops working.
At this time, thermostatic element there is still oil in the tank, please follow the following points to supplement calmly. First remove the cover, then close the shut-off valve between the auxiliary tank and the oil tank of the oil supplier to cut off the path between the two tanks, and then gently open the oil supply port above the auxiliary tank for oil replenishment. Please note that there is still a small amount of pressure in the tank. If grooving is done quickly, the washer will be damaged. When the oil supply is finished, the oil supply port should be closed strictly and the air shutoff valve should not be forgotten to open.
Auxiliary oil tank is a kind of oil supply mechanism that can continuously eject oil mist by means of the work of shut-off valve and oil receiving valve. When the oil is supplied, open the shut-off valve, then the air in the oil tank of the oil supplier is introduced into the auxiliary oil tank, so that the oil valve opens automatically and the oil flows into the oil tank of the oil supplier. At this time, the indicator lights turn red and green, and the heater is connected. No matter what method of lubrication is used, the first thing is that a thin film can be coated on the friction surface. If the amount of lubricating oil is used too much, it will not only waste, but also sometimes damage the lubricating surface due to heat caused by fluid friction. The spray lubrication method does not waste excess oil or spill oil because it only supplies the necessary amount of oil. Therefore, it is possible to keep the machine running clean, and because the oil particles are not wasted completely for lubrication, the oil consumption is more economical than other methods. Conclusion: Proper lubrication can prolong the service life of bearings, reduce the cost of spare parts needed, and reduce the time required for shutdown maintenance. Imported micro spray lubrication device has been used in every dipping equipment of cord fabric company, especially for long-term operation of multiple roller bearings centralized spray oil lubrication, the effect is excellent.