In the electronic communication system, the design of shunt controller should be taken into account, hardware management should be realized according to the characteristics of traditional methods, and load shunt control and management should be carried out through the communication system to ensure the expansion and sensitivity of hardware products, promote the quality management level of load shunt in the system, and deal with the unbalanced load in the system. Dangerous issues. In order to improve the balance of electronic communication system, ensure the rational use of dynamic HASH algorithm, and realize the reasonable shunt control management of electronic communication system. According to the Telnet component of the shunt controller, the management and design of the remote components of the router can be improved. At the same time, the SNMP component can be used to realize the internal flow management of the router, to ensure the data management of variables, to reasonably use the feedback command file of the router of the TFTP server, and to ensure the balance of the interface flow of the router. Aiming at the radio communication distance analysis of electronic communication system, in order to deal with the radio coverage and various problems in time, this paper designs a set of reasonable electronic wireless communication control system, which connects the remote radio equipment to the hub of communication center through IP network, thus expanding the coverage of electronic communication system. It effectively solves the problem that the communication distance of a single part is limited.
It can realize the mutual backup between radio stations and improve the reliability of electronic communication. The shunt controller realizes the balanced flow management of the system mainly through dynamic updating of the equalization module, the preprocessing module and the balanced shunt processing mode. Based on the dynamic flow algorithm, thermostatic element the shunt control management mode of the electronic communication system is adopted. According to the shunt controller strategy, the dynamic processing of normative key codes in routers is improved. The electronic communication system with well-designed shunt controller can realize the optimization of network load balance in time by dealing with transmission management, transmission mode, transmission rate and shunt error. According to the shortwave communication, the ship can be handled well, the stability level of the ship can be improved, the modulation mode changes caused by seasonal and weather changes can be reduced, the noise and communication quality can be reduced, the shortwave radio and communication means can be handled well, the communication distance of the radio can be handled stably, the rationalization management can be realized, and the existence of various factors can be guaranteed. Reasonable effect, shorten the communication distance in time, and ensure the rationalization level of communication management in the actual use process. Guarantee the reasonable ship distribution management of electronic communication system, promote the analysis of the distance between ship-borne electronics and radio, ensure the coverage of electronic signals, do a good job of command in time, stabilize the backup between radio stations, promote the reliability of electronic communication, ensure the improvement of remote control methods and operation methods, and optimize the processing of radio equipment. Identifying the location of intelligence and communication hubs. The system network structure and equipment constitute the communication hub of dispatching tablecloth, control the remote machine layout and station location management, dispatch the remote radio control mode, realize the remote control of the radio, ensure that the system can realize the central equipment dispatching and remote machine combination. According to the central equipment, the management and dispatch of the equipment should be done well, and the mutual management between the central equipment and dispatch communication should be promoted. To ensure the rational management of electronic communication systems, to ensure the composition of the overall system network structure, and to enhance the level of user equipment management. In the management of central equipment, comprehensive control, network switch, network management, user equipment, dispatching station, remote machine and VHF radio processing should be improved. The shunt is mainly based on the principle of voltage generated by DC current through resistance at both ends of the resistor. It can measure instruments reasonably, promote the joint management of current, and continuously expand the measuring range. In the process of measuring voltage and indirect measuring current components, it is necessary to promote the application of current measured by instruments. Fixed value shunt and precise alloy resistor can ensure the control and management of communication system, electronic integrator and automation, realize the rational use of current and voltage meter, promote the rated step-down specification of shunt for dial data, ensure the value of ammeter, reasonably calculate voltage limit, and fully ensure the pressure reduction of shunt. Strictly according to a certain point flow procedure to select reasonable shunt rated current specifications for processing. The two current terminals of the selected shunt are rationally shunted and loaded, and the range management of potential terminal ammeter, ammeter and ammeter is well handled so that the current value of the shunt can be analyzed reasonably. The most important problem to be solved in the electronic communication system is the reasonable design and control of shunt, ensuring the rationalization of system workflow, timely scheduling of IP access network management, using the call information model data conversion processing chip digital signal, sending voice information to the network port chip IP, and then exchanging and processing the specific configuration letter in the network.
Information, router connection and equipment status query work, improve voice conversion processing level. The core part of the switching center is to promote the control and management level of the shunt, to ensure the reasonable dispatch of control procedures, remote system control and the management level of related equipment, to ensure the rational configuration and management of network status and equipment parameters, to stabilize equipment protocols, and to realize the rational configuration and statistical management of network and information.
According to the specific situation, coordinated development of data management. To ensure that the delayed traffic center forwards voice remote transmission in time, the remote computer and IP packet information control management need to be handled in time through IP connection, so as to improve the level of remote control interconnection. In the case of radio needs, the wireless signal and reasonable transmission of communication voice should be handled well, and the reasonable management of corresponding ship and communication hub ship information should be improved. Rational level, through system access to promote the use of multi-channel remote machines, to ensure one-to-many, multi-to-many and one-to-one multi-mode calls, to ensure that the level of communication process management is improved, to promote the reasonable processing and management of processes and instructions between the system media, and to enhance the design level of electronic communication system shunt control. In the process of working, we should improve the integrated control management, strengthen the management of the core functional equipment of the integrated control center, improve the functional settings of the connection dispatching desk, remote machine and local network interface, ensure the functions of the central equipment and the reasonable management of the mutual interface, reasonably set up the main control and exchange layout, and improve the management of the main control layout. Level, to ensure the realization of central equipment and user database functions, to fully exchange multiple services, to ensure the nature of scheduling and remote data communication management, to ensure the registration and equipment data information processing, and to improve the level of single board IP data exchange and network interface management within the exchange board. According to the working principle of dispatching desk, the communication hub and man-machine switching equipment of dispatching desk are processed, and the internal control of dispatching is carried out by telephone mode, which promotes the rational processing of conversion board and main control board, stabilizes the transformation of balanced data, carries out control data analysis, manages display screen, control indicator lamp, and carries out keyboard operation and dispatch.
Principle frame processing. Processing the remote computer system according to the working principle of the remote, and carrying out radio communication bridge work to ensure that the remote can collect data from the IP interface, send data packets to the FPGA through ARM/DSP, and then send the data to the main control board, promote the reception and signal shunt management of the main control board, and promote voice according to voice information transmission. Merge, improve the level of radio control information release and analysis. Control MCU reasonably in a certain conversion, promote radio identification and remote operation, ensure radio remote control, improve information control and voice conversion level for frame information parsing and corresponding PTT, BUSY voice packages. In the electronic communication system, we should constantly improve the management level of the interface system of network management software, improve the level of graphics visualization, promote the operation of system management configuration stably, and finally ensure the management of exchange center and parameter information.
Reasonable configuration of the system, type switching of remote radio, data parameter configuration and data change processing are accomplished by network software. According to the software configuration data, historical alarm information, user management information and a variety of historical information, keep a good long-term information collection, fully realize visual interface management, and use new functional module design to ensure efficient management of wireless communication systems, and improve efficiency and stability. Traditional methods can improve the load shunting of hardware communication system, ensure the sensitivity and stability of hardware product expansion, promote the handling of system load imbalance, ensure the stability of load balance of electronic communication system, and realize the shunt management and control of electronic communication system. Guarantee the remote deployment and management of routers, promote the connection of routers and the balanced management of traffic, promote the shunt to advance the pretreatment work through dynamic guarantee, improve the shunt management level of electronic communication systems, and adopt reasonable traffic management methods to improve the balanced and stable transmission of dynamic algorithms and communication systems. 。 In summary, in remote control, we should improve the management level of electronic communication control system.
The system composition and working principle are described in detail. The advantages of radio technology and Internet management system are utilized to continuously expand the scope of electronic communication system, improve radio remote control and system management, stabilize the requirements of nursing design, promote the improvement of system expansion ability, and reform the remote control management of system radio equipment to fully guarantee electronic system control. System design level.